HTM100 light hydraulic down-hole drill is a multi-functional drill
rig driven by internal combustion engine, the drilling power was
provided by hydraulic system except for impacting and the hole
cleaning wind. It is convenient and efficient to operate. This
drill is the best replacement for traditional pneumatic drills in
most operation. The drill is compact in structure, simple in
operation, light in total weight. HTM100 hydraulic crawler drilling
rig is widely used for blast-hole drilling in the mines and
quarries. It is also used for anchor in road, railway, power
station, civil engineering and building etc.
Characteristics >>
The Rugged track was driven by hydraulic motor with high traveling
ability.
The feed and rotary head were driven by hydraulic motor, therefore,
the air and oil consumption and total drilling cost are lower.
The hydraulic feed and rotary head put out the biggest feeding
force and largest rotary torque, which makes it more suitable for
operation in complex worksites.
The compressor equipped for the rig is smaller and cheaper than
that one the air rig equipped, along with the best
price-performance ratio than air rig.
The Hydraulic track oscillation makes it more suitable to drill in
any rough terrain.
The carriage with rollers provides for minimal wear to the drill
guide.
The Hydraulic auxiliary functions are easy and efficient for guide
extension, boom swing, boom lift, guide tilt and guide dump.
Equipped with two hydraulic clamps is easy to load and unload
drilling rods and improve efficiency.
The diesel engine and main hydraulic parts adopt imported products
or famous domestic companies.
The special compensation device makes a full protection of drill
rod threads.
Specifications >>
Specifications | Unit | Model |
HTM100 |
Net Weight | kg | 4200 |
Outside Dimensions | m | 5.2×2×1.5 |
Ground Clearance | mm | 250 |
Traveling Speed | Km/h | 2 |
Gradeability | ° | 22 |
Engine Power | kw | 59 |
Hole Diameter | mm | 90-115 |
Hole Depth | m | 50 |
Air Compressor | M/min | 15-20 |
Air Pressure | Mpa | 0.8-2.5 |
Pull Down/Back Force | KN | 30 |
Pull Down/Back Speed | M/min | 15 |
Feed Stroke | m | 3 |
Rotation Torque | Nm | 4000 |
Rotation Speed | rpm | 0-80 |
Drilling Rod Diameter | mm | 60,76,89 |
Optional Devices
Hydraulic drifterExpansion boomDry dust collector
ODEX or OD pipeDrill rod rackWet dust collector
